HHB comm PERSONAL COMPACT DISC RECORDER CDR 830 User Manual download pdf (Page 26)

26

4 Getting started

2 Press FINALIZE.

The FINALIZE indicator lights.

After a short while you should see

a display something like this:

The display shows how long

finalization will take—the exact

time taken depends on the disc.

Press 7 here to cancel

finalization.

3 Press

88

88

8 (

66

66

6 on the front

panel) to start finalization.

Finalization takes about two

minutes; you'll see how long there

is remaining in the display. The

player stops when finished.

For a CD-R, the CD-R indicator

now changes to simply CD.

For a CD-RW, the finalize

indicator lights in the display.

None of the controls on the

player or the remote have any

effect during finalization. If,

however, the recorder hasn't

managed to finalize the disc

within 10 minutes, you can abort

the operation by pressing 7 . If

you do this, the disc won't be

playable on an ordinary CD player.

Finalizing a disc

Before you can play a CD-R on an

ordinary CD player, the disc must

go through a process called

finalization. Once finalized, a CD-R

disc is no longer recordable, nor

will you be able to set or clear

skip IDs. Finalization is not

reversible for CD-Rs so be

absolutely sure that everything on

the disc is the way you want it

before you start.

CD-RW discs can also be

finalized, although you can still

erase the disc afterwards and

reuse it, so it's not anything like

as final as it is with a CD-R disc.

A finalized CD-RW disc can only

be played on a CD player that is

compatible with CD-RW discs

(currently only recent players).

Caution!

Finalization takes a couple of

minutes. During this time never

switch off the power to the unit—

the disc may become unusable as

a result.

1 Load the CD-R or CD-RW

you want to finalize.

Check that the disc is free from

dust, dirt and scratches—if

necessary, clean the disc,

following the guidelines on page 7.

3

2

MONITOR

INPUT

SELECTOR

AUTO

MANUAL

TITLE/MODE

TRACK NO.

WRITE

DISPLAY

FINALIZEERASE

SCROLL

CD TEXT

DIGITAL

REC LEVEL

ANALOG

REC LEVEL

MENU/

DELETE

TEXT

SYNCHRO

PROFESSIONAL

DIGITAL

REC LEVEL

ANALOG

REC LEVEL

MENU/

DELETE

TEXT

SYNCHRO

PROFESSIONAL

MONITOR

INPUT

SELECTOR

AUTO

MANUAL

TITLE/MODE

TRACK NO.

WRITE

DISPLAY

FINALIZEERASE

SCROLL

CD TEXT

2

1

Resetting the

recorder

This erases all saved text

information and returns the

recorder to its factory settings:

• Copy-bit setting - PERMIT

• Fade length - 5 SEC

• Time increment recording - OFF

• Silence threshold level - −54 dB

• Digital volume - 0.0 dB

• Balance - CENTER

1 Eject the disc if there is

one in the recorder.

2 Hold down SCROLL then

press MENU/DELETE.

Note: If you have finished all the

recording you would like to do,

and have set CD text for a disc,

make sure to finalize the CD

before resetting.

2

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 49 50

Comments to this Manuals

No comments